Basic home functionality has changed significantly since the advent of garage door remotes. These pieces of technology have made the lives of homeowners easier by enhancing the access they have to their garage area. That being said, nothing is more obnoxious than a remote control that doesn't work as it should. Therefore, buying the right garage door remotes can go a long way towards easing the stress that you feel over every day routines. This guide will help you decide which one is the right model for your garage door.
The basic idea of these systems is that garage door remotes provide a signal that is sent out and received inside of your closed garage. Once the signal is received, the chain pulley system is activated and your garage door will start to open. But there is actually a degree of complexity to modern remote control devices for garage doors. There have been several different innovations that have added buttons to these remotes over the year. Most people wouldn't expect to see such complexity involved with something that appears so straightforward.
One common issue faced by homeowners is that they buy a garage door remote, only to get home and find out that it won't work. This can leave some people flustered because it doesn't seem like this should be a complicated process. But you will need to get a remote that can sync itself with the garage door opening system that you already have installed. A method you can use to avoid problems is to simply buy a remote made by the same brand as your original garage door opener. Typically, the manufacturer will use similar receiver codes for all of their remote controls. If you do buy a third party garage door remote, check the back of the packaging. This will usually display some information about the brands that the remote supports. If you don't see your brand listed, you may not want to buy a third party remote control.
If you have an older garage door remote controller, realize that it may stop working when you install a new system. The reason for this is that these remotes are actually developed in stages. Some of the earlier first and second generation remotes used a 100-200 MHz frequency to send a signal out to their garage door receptors. The problem is that modern third and fourth generation garage door receivers will only work with the new remotes. This is because these remotes send out signals that operate using a 300 or 315 MHz frequency.
Many times the remote will also be integrated into a home security system. This is appealing to customers because they can shut off the home's alarm system before they even get to the door. The advantage here is that it reduces the risk of accidentally triggering the alarm system to go off and disturb the neighborhood. The only drawback is that it adds a degree of complexity to your garage door remotes. Instead of just one or two buttons, you may now have an entire number pad full of digits to use. If you have a hard time seeing the numbers or you have arthritic fingers, it may make pressing the buttons difficult. Just be aware of this before you commit to using a remote control. As always, do plenty of research on any product before you buy it.
This article has been written by Sarika Periwal, a home improvement blogger. Try A Click Away Remotes for your garage and home solutions. Make sure your garage door opener functions smoothly and is tamper and break-in proof.