Home improvement projects run the gamut from easier than pie to industrial nightmare. Installing window trim falls somewhere in the middle. This is a job that will take a bit of time, but you should be able to get it done on your own if you play your cards right. Follow these 5 tips for installing window trim to make sure you do the job right the first time.
Measure Twice, Cut Once
Installing window trim is a project of precision. A measurement that is off by even a millimeter or two can easily bungle the entire job and send you back to the hardware store for more supplies. You want this to be a set-and-forget deal, so spend the extra time it takes to double check all of your measurements. If you can get your measurements perfect, everything else will quickly fall into place.
Double Up Adhesives
Window trim is often set into place with industrial adhesives rather than being nailed into place, while other times the two are used in tandem. Whatever your case may be, it is essential to lay your adhesives down the right way to ensure a secure bond and prevent air bubbles from creeping in. Apply your adhesive to both the back of your trim and the wall to which it will be attached for the strongest possible connection. Make guidelines for yourself to be sure you're gluing in the right places.
Secure for Drying
As your adhesive dries and the trim begins to set in place, you want to make sure that it stays in place. If you intend to forego the use of nails in your project, this can usually be accomplished by using tape to keep the trim from moving while the glue dries. Wait at least a day before removing the tape, as these adhesives need a good amount of time to dry. Without enough time to set, your trim could end up settling crooked or warped, completely botching your project.
Seal the Joints
Once your trim is completely set in place and firmly secured, you'll want to fill in the empty spaces where the corners meet. It may seem like a flush joint, but these spots will let air into the house if left unsealed. This makes your rooms drafty in the winter, and cause you to spend more money on heating. Fill in the cracks with caulk to make your rooms air-tight and weatherproof. This is especially important for outdoor trim.
Keep It Simple
Installing window trim is a relatively simple job in most cases. Getting a presentable finish is more a matter of careful measuring an diligent cutting than any kind of mechanical aptitude. However, the more complicated a job becomes, the more difficult it will be. For an oddly shaped window such as one with an arch design, it might be more prudent and less stressful to bring in a professional for your trim job. Part of succeeding in home improvement is knowing your limitations.